If you are planning on selling your home, there are some simple things that you can do to drastically increase the amount of money you will receive from it. Remember that most people that will look at your home will also look at comparable homes in your neighborhood. Top real estate value can only be achieved for your home if it stands out from all the rest of the similar homes in the neighborhood.

Real Estate Value – The 60 Second And 60% Rule

A home has 60 seconds to make a lasting impression on the potential buyer, so make it a positive one. Experts agree that 40% of the buying decision is determined when the potential buyer first drives up and gets a glimpse of the house from the curb. Another 20% of the buying decision is made when the potential buyer first enters the house; in other words 60% of the decision to buy or not to buy the house has been made right after the prospective buyer enters the house. That should tell you that 60% of your time preparing the house for sale should be concentrated in the front of the house and in the area as you just enter the house

Most potential buyers are looking to get excellent value for real estate they invest in and are looking for an uncluttered home with a free-flowing floor plan, and bright, clean interior.

Real Estate Value – Tip Top Condition

Make sure you pay special attention to the front yard: cut and trim the grass, trim trees and shrubs, plant colorful flowers, and paint the exterior of the house, if needed.

Real Estate Value – Remove Clutter

It is recommended that you open up all tight traffic areas and remove some furniture from the home to make it look larger. Change the light bulbs to the maximum wattage allowed, and open all drapes, shutters, and shades. If you are going to repaint the interior of the house then use white, this gives the potential buyer a canvas to work with.

Real Estate Value – Appeal To The Buyer’s Senses

You must make sure there are no offensive odors in the house because nothing turns off a potential buyer like a bad smell. If you are going to have an open house, then turn off the TV, turn on some soft music, and make some fresh smelling cookies or bread.

Real Estate Value – Exposure

Pure mathematics suggest that, the more potential buyers that tour your home the better chance you have to sell it at top dollar. Make sure your marketing plan includes listing your home on the internet both locally and worldwide. Professional flyers and brochures distributed in the neighborhood is another excellent way to give your home exposure.

Real Estate Value – Don’t List Too Long

If your home has not sold in a reasonable length of time, then take it off the market. A house that stays on the market to long, goes stale, and then will sell for a lower price. It is better to let the market correct itself, then relist.

Bookmark to:

Sheet metal siding is one of the cheapest yet most durable siding materials on the market today for the building of commercial structures as well as residential housing and kit homes.Installing sheet metal siding is also one of the easiest procedures since it is much lighter building material and is able to be handles without the use of construction cranes or other large equipment.Instead it can be handled with a forklift, which is much easier and much less expensive to use.

What to Expect

Sheet metal siding comes in different types of finishes so that whatever look is desired can be created with the siding, even a wood-like or stucco-like finish.In addition, sheet metal siding is made of different materials such as zinc, aluminum, copper, or steel.This also allows the user to choose the design he wants to create.  There are different lengths and widths of sheet metal siding to fit any project, as well as gauges so that the individual can choose the thickness of the metal, the higher the gauges, the thinner the metal.Sheet metal panels can be installed either horizontally or vertically which can create wonderful patterns, especially when using corrugated metal which has a texture to it.

Sheet metal siding can also contain insulation so that it provides extra protection against the elements.This type of siding is called insulated metal siding or IMP.  This type of siding is injected with liquid insulating foam which is usually made of polyurethane.Once the foam dries, it hardens and fills the space between the two metal sheets, providing a solid panel that is sure to provide great insulation to any structure, thus reducing heating and air conditioning costs during every season.

Sheet metal siding does expand and contract a lot with the elements, so the builder needs to be familiar with the use of this siding when attaching it to the structure to provide for that movement.  Sheet metal siding usually costs somewhere around eight dollars per square foot, which is about the least expensive on the market.Although it might cost slightly more than the cheapest materials, sheet metal siding usually lasts for up to forty years and the maintenance is usually around thirty cents per square foot per year, which is significantly below other products.In addition, the siding can also be removed and reused in other projects, thus recycling the metal without additional recycling cost, thus making sheet metal siding a ‘green’ product.

Bookmark to:

Corrugated metal siding is often used when a decorative affect is desired in different building projects.Corrugated metal siding is not as strong as other types of metal siding and is usually added over other types of siding that help with the structural soundness of the building.  This type of siding usually has some sort of wave effect to it, which provides a nice texture for various walls and also roofs for kit homes.

Types of Siding

There are different types of siding that might be used in conjunction with corrugated metal siding, such as an insulated metal siding so that the structure will be more cost efficient in the long run.This insulated metal siding is made by placing liquid insulation foam within two sheets of metal siding.The foam hardens within the metal after expanding so that the entire piece is one solid panel.Because the foam fills the panel completely, there is no room for air gaps which are left in other types of insulated siding, and it gives a uniform insulated surface wherever it is used. 

When the siding is corrugated siding, there are different shapes that are molded into the metal, such as a rounded wave-like pattern.These waves can be different widths, so that it can be a bunch of two and a half width waves that are one half inch deep, to having waves that are wider and deeper, even to over four inches wide and over an inch deep.

There are also squared off or ribbed corrugated metal siding in which, instead of having uniform waves that are rounded, there is a pattern of one larger, flat-topped wave with two small waves in between before the next larger wave.In addition, there are full ribbed corrugated metal siding in which the waves are uniform and flat-topped across the panel.The final form of corrugated metal siding is a ‘reverse’ wave, in which the waves seem to be dipping into the panel rather than sticking out from it, creating a trough type effect.

As with most metal siding, corrugated metal siding is treated or galvanized in order to protect it from the elements and the corrosion and oxidation that can occur.Usually it is coated with a zinc oxide, but there are other metals that are sometimes used as well.Corrugated metal siding is light and easy to maneuver like other types of metal siding and connects tightly together to protect the structure from the elements.

Bookmark to: